Faxing Problems - Epson WorkForce 610 Series Quick Manual

■
If documents don't feed correctly in the Automatic Document Feeder, make
sure the corners of the paper are not bent, folded, or curled up. Do not load
too many sheets at once (see page 10).
■
If documents have jammed in the Automatic Document Feeder:
1. Open the ADF cover and pull any paper out to the left.
Caution:
Do not try to remove the paper without opening the ADF cover first, or you
could damage the mechanism.
2. Select
3. Reload the paper.

Faxing Problems

■
Make sure the recipient's fax machine is turned on and working.
■
Make sure the
jack. Verify that the telephone wall jack works by connecting a phone to it.
■
If the line has static, press the
select
Fax Setting
off the
V.34
■
If your product is connected to a DSL phone line, you must have a DSL filter
connected to the phone jack. Contact your DSL provider for the necessary
filter.
48
Solving Problems
or press to clear any messages on the display screen.
Yes OK
port on your product is connected to a telephone wall
LINE
, press
OK
and (Error Correction Mode) settings.
ECM
button and select
Home
, select
Communication
. Press or
Setup
l
, then press . Turn
OK
to
r