Epson WorkForce 610 Series Quick Manual page 23

4. Press or to select
u d
Note:
If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select Color.
5. Press , if desired, to see a summary of your fax transmission settings.
OK
6. Press
x Start
To cancel faxing, press y
If you are scanning with the Automatic Document Feeder, your document is
automatically scanned and faxed.
If you placed your document on the scanner glass,
you see this screen after the first page is scanned:
If you need to fax additional pages, select
press . Then place your original on the scanner
OK
glass and press
fax another page, select
Note:
If the fax number is busy, you see a redialing message and the product redials after
one minute. To redial immediately, press Redial/Pause.
Other Ways to Dial a Fax Number
In addition to manual transmission, here are some other ways you can enter a fax
number:
■
If you've connected a telephone to your product, you
can dial the fax number from the phone. When you
see the screen at right, select
Note:
Don't hang up the phone until the product begins
transmitting the fax.
■
To select a speed dial or group dial entry, press
Speed/Group Dial/Backspace
number of the speed dial entry you want to use,
then press
OK
or
Color B&W
to send your fax.
Stop/Clear Settings
to continue. If you don't need to
OK
, then press
No
Send
.
.
.
and
Yes
.
OK
, then press
OK
. Select or type the
.
Sending a Fax
23