Maintaining Your All-In-One; Checking The Print Head Nozzles - Epson WorkForce 610 Series Quick Manual

Maintaining Your All-in-One

Follow the steps here to check and clean the print head, and replace ink cartridges.
To align the print head, if necessary, see the online Epson Information Center.

Checking the Print Head Nozzles

If your printouts are faint or have gaps in them, the print head nozzles may be
clogged. Follow these steps to check the print head nozzles:
1. Load letter- or A4-size plain paper in the sheet feeder (see page 6).
2. Press the
3. Press ,
l
4. Press or
l
You see this screen:
5. Select
Nozzle Check
6. Press
x Start
7. Check the nozzle check pattern that prints to see if
there are gaps in the lines.
Nozzles
are clean
Nozzles need
cleaning
8. If there are no gaps, the print head is clean. Select
press
OK
If there are gaps or the pattern is faint, select
Then press
38
Maintaining Your All-in-One
button.
Home
, , or to select
r u d
to select
Maintenance
r
and press
.
.
to clean the print head.
x Start
, then press
Setup
, then press
.
OK
Head Cleaning
.
OK
.
OK
Finish Nozzle Check
and press
and
.
OK