Glass Care; Glass Gasket - England's Stove Works 50-SNC30 Installation & Operation Manual

REPLACE GLASS ONLY WITH HIGH-TEMPERATURE ROBAX PYROCERAM OF THE
PROPER SIZE AND THICKNESS.
The following use and safety tips should be observed:
Inspect the glass regularly for cracks or breaks. If you detect a crack or a break, extinguish
1.
the fire immediately, and contact your dealer or Customer Service at (800) 245-6489 for
replacement (or log on to
Do not slam the door or otherwise impact the glass. When closing door, make sure that logs
2.
or other objects do not protrude and impact the glass.
Do not clean the glass with materials which may scratch (or otherwise damage) the glass.
3.
Scratches on the glass can develop into cracks or breaks.
Never attempt to clean the glass while the unit is hot. If the deposit is not very heavy, normal
4.
glass cleaners are adequate with a plain, non-abrasive scouring pad. Heavier deposits may
be removed with the use of an oven cleaner.
NEVER put substances that can ignite explosively inside the unit, since even small explosions
5.
in confined areas can blow out the glass.
This unit has an airwash system, designed to reduce deposits on the glass.
6.
After extensive use, the sealing material which provides glass and door seal may need to be
replaced if it does not sustain its resilience. Inspect the glass and door seal periodically to ensure
proper seal. If the gaskets become frayed or worn, replace immediately. Contact your dealer or
Customer Service at (800) 245-6489 or
The following steps should be followed for replacement of the glass gasket:
Ensure that the appliance is not in operation, and is thoroughly cooled.
1.
Remove the screws and glass holders.
2.
Lift glass out.
3.
Remove the old gasket, and clean the glass.
4.
Replace the new gasket, starting at the bottom of the glass and working along the edges. Be
5.
sure to center the gasket channel on the glass.
Trim the gasket to length and butt the ends together.
6.
Replace the glass and holders in the door. Tighten, being sure not to over-tighten the screws.
7.
You may order parts and options on our web site:
or by calling (800) 516-3636 (parts orders only, call 800-245-6489 for technical questions).

GLASS CARE

www.heatredefined.com
GASKET REPLACEMENT
www.heatredefined.com
17
).
for approved replacement parts.
www.heatredefined.com ,