Sony Bravia OLED XR-55A90J Help Manual page 72

4/7/2021
can operate it by simply using the TV's remote control.
Note
You need to configure the [Digital audio out] settings according to your audio system.
Press the
[Display & Sound] — [Audio output] — [Digital audio out].
If the audio system is not compatible with Dolby Digital or DTS, set [Settings] —
[Display & Sound] — [Audio output] — [Digital audio out] to [PCM].
The [Digital audio out] settings are disabled when using audio signals that are
passed through from the HDMI input and using eARC.
Hint
If a specific audio system is connected with an HDMI cable, you can adjust the
output timing of the picture and sound.
Adjusting the AV sync setting
For details about supported models, refer to the support site.
Support Site
Related topics
BRAVIA Sync-compatible devices
Connecting an audio system
No sound but good picture.
No audio or low audio with a home theatre system.
[67] Audio system (such as an AV receiver or sound bar) | Audio system (such as an AV
receiver or sound bar)
Using the TV as a centre speaker (only models with
TV centre speaker mode)
Models with TV centre speaker mode have CENTER SPEAKER IN terminals on the back
of the TV.
If [Speakers] is set to [Audio system], you can use the TV speakers as a centre speaker
for a home theatre simply by connecting an AV receiver to the CENTER SPEAKER IN
terminal of the TV .
https://helpguide.sony.net/tv/iaep1/v1/en/print.html
(Quick Settings) button on the remote control, then select [Settings] —
*
Help Guide
72/142