Sony Bravia OLED XR-55A90J Help Manual page 41

4/7/2021
Registering a USB HDD device
This function is available only in limited regions/countries/TV models.
USB HDD recording models have [Recording device setup] in [Settings] — [Channels &
Inputs].
Connect and register a USB HDD device to your TV to record digital broadcasts.
Connect the USB HDD device to the TV's USB port labelled "HDD REC" (if there is a blue
USB port, that port supports HDD recording).
(A) USB HDD device
(B) USB cable (not supplied)
1
Connect a USB HDD device to the USB port (blue) labelled "HDD REC" on
your TV.
2
Turn the USB HDD device on.
3
Wait until the screen [USB drive connected] is displayed.
If the message does not appear you can manually register the USB HDD device
from the Settings menu.
4
Select [Register for recording].
5
Follow the on-screen instructions to register the USB HDD device.
Note
If the message "Can't detect a USB HDD for recording" is displayed during
registration in step 4, follow the instructions in the message and check that the USB
HDD device for recording is connected to the USB port (blue).
If the USB HDD device for recording is not recognised even after you have checked
the connection, you must register the USB HDD device again because it has already
been registered as a device for purposes other than recording. Refer to "The USB
https://helpguide.sony.net/tv/iaep1/v1/en/print.html
Help Guide
(B)
(A)
41/142