CrimeStopper SP-502 Installation Handbook page 26

PROGRAMMABLE OPTIONS Cont.
27. Aux #3: ACC or Aux Output (Violet/White wire)
This option controls the function of the Violet/White wire for a negative output for a Momentary, Pulse, Timed or
Latched output, depending on option used. Option #27 controls the length of time output.
28. Aux #3 Time control: (1 sec. to 255 sec.) Default = 12 seconds
This option determines the length of time that is outputted from Aux #3 (Violet/White wire). Pressing the Lock or
Trunk buttons on the remote raises or lowers the time by one second. Pressing the Start button increases the time
10 seconds.
29. Aux #4: IGN or Aux Output (Green/White wire)
This option controls the function of the Green/White wire for a negative output for a Momentary, Pulse, Timed or
Latched output, depending on option used. Option #29 controls the length of time output.
30. Aux #4 Time control: (1 sec. to 255 sec.) Default = 12 seconds
This option determines the length of time that is outputted from Aux #4 (Green/White wire). Pressing the Lock or
Trunk buttons on the remote raises or lowers the time by one second. Pressing the Start button increases the time
10 seconds.
31. TURBO TIMER: Using Remote Start Button
The optional Turbo Timer mode allows the Pro Start system to keep a Turbo or Turbo Diesel vehicle running for 1, 3
or 5 minutes [selectively] after you remove the key and exit the vehicle. This is handy for turbo cool-down without
the need for expensive turbo timers. The Default = OFF.
32. PINK WIRE FUNCTION: PASSIVE CAR JACK TRIGGER or GLOW PLUG INPUT:
This option controls whether the system's PINK input wire functions as a Glow Plug input wire for Diesel Engines or
a +12V input for tripping a Carjack countdown. For Glow plug, this wire should be connected to the wait to start light
circuit. For Carjack this wire can be connected to a hidden push button, or a +12V Ignition circuit for Passive Car
Jack operation (see operations manual). Default = Glow Plug.
26