CrimeStopper SP-502 Installation Handbook page 24

15. TRANSMISSION TYPE:
This option selects automatic or manual transmission mode. Manual transmission requires a Tach wire.
1. Manual Shift Transmission - Requires Remote Start Button pressed with (-) Hand Brake Activated.
2. Automatic Transmission – Default.
3. Manual Shift Transmission – Exit procedure starts with (-) Hand Brake Set and engine running.
4. Manual Shift Transmission – System finishes exit procedure automatically. Remote Starter shuts down 2
seconds after closing last door. Not necessary to press remote to set up manual transmission.
16. UNLOCK BEFORE REMOTE START:
This option is used to disarm an OEM Alarm System before Remote Start. Default = OFF
17. BLUE/BLACK WIRE FUNCTION:
This option controls the function of the Blue/Black wire as either a Ground with Remote Start or a 2
18. SIREN OUTPUT:
This option controls whether the Siren Chirps with Arm / Disarm and Warning. There are 3 choices:
1. Siren Activates with Alarm Trigger only.
2. Siren Chirps with Arm / Disarm / Warning and Alarm Trigger - Default.
3. Warning Chirps and Alarm Trigger (no arm / disarm chirps).
19. HORN HONK OUTPUT:
This option controls whether the Car Horns Chirp with Arm and Disarm and Warning. There are 3 choices:
1. Horn Honk with Alarm Trigger only.
2. Warning Chirp and Alarm Trigger - Default.
20. HORN CHIRP with LOCK and UNLOCK - 1 or 2 Button Press
This option allows the system to chirp the vehicle horn for Lock/Unlock confirmation on 1 button press or a 2
within 3 seconds. The horn output must be connected to use this feature. Default = 2 Press.
21. HORN PULSE DURATION: This option allows adjustment the "CHIRP" pulse duration of the car horns. The
choices are 15, 20 or 40 milliseconds.
PROGRAMMABLE OPTIONS Cont.
24
nd
Aux. Channel.
nd
press