Commissioning The System - Viessmann Vitocal 300-G Installation And Service Instructions For Contractors

Further details regarding the individual steps

Commissioning the system

Commissioning (configuration, setting
parameters and function checks) can be
carried out with or without the commis-
sioning assistant (see the following
chapter and the separate service instruc-
tions for the Vitotronic 200 heat pump
control unit).
Commissioning with the commissioning assistant
The commissioning assistant guides you
automatically through all the menus
where settings have to be made. For
this, "Coding level 1" is automatically
active.
!
Please note
Incorrect operation at "Coding
level 1" may result in damage to
the appliance and the heating
system.
Always observe the instructions
in the separate service instruc-
tions of the Vitotronic 200 heat
pump control unit, otherwise the
appliance will no longer be under
warranty.
Commissioning, inspection, maintenance
(cont.)
Note
Type and extent of parameters depends
on the heat pump type, on the selected
system scheme and the accessories
employed.
Switch on the ON/OFF switch on the
heat pump control unit.
■ The prompt "Start commission-
ing?" appears automatically on first
commissioning.
Note
The commissioning assistant can also
be started manually:
When starting the heat pump control
unit (progress bar visible), hold down
.
■ When the unit is first commissioned,
the display is in German:
Sprache
Deutsch
Cesky
Dansk
English
Wählen mit
■ Manually switching some appliance
components during commissioning
enables the heat pump control unit to
display messages. These do not indi-
cate appliance faults.
DE
ç
CZ
DK
GB
107