Table of Contents
Advertisement
• 7DP - Seven days programmer (Accessory not supplied)
Centralized Control and Week Timer
Functions: The centralized control-
ler and the weekly timer are integra-
ted in the same wire controller. The
system has both the centralized con-
1
Unit dispaly
2
Single/group display
3
Timer week display
4
Timer display
5
Timer state display
6
Timer time period display
7
Timer ON/OFF time display
8
Unit on display
trol and the week timing functions.
Up to 16 sets of units can be control-
led simultaneously by the centralized
controller (weekly timer). The weekly
timer has the function of invalidating
Composition of programmer wall week
9
Unit off display
10
Clock display
11
Confirm button
12
Increase button
13
Decrease button
14
Cacel/delete button
15
Single/group button
16
Timer/time button
17
ON/OFF button
16
U nit Function
the lower unit. The weekly timing fun-
ction is able to realized four timing
ON/OFF periods for any unit every
day, so as to achieve fully automatic
operation.
This WEEKLY TIMER adopts 485
mode to communicate with manual
control of every duct type unit, and it
can control up to 16 units. Adopting
2-core twisted-pair wire, the lon-
gest communication distance of this
TIMER is 1200m. After connected
to power, the WEEKLY TIMER can
display all connected units (sequence
of unit is determined by code switch
of manual control of every duct type
unit). On and off of every duct type
unit can be done through the Timer
On / Off of this WEEKLY TIMER, and
the button shield operation of manual
control can be done through shield
setting on WEEKLY TIMER. Mode
selection and temperature adjust-
ment and other operations are done
through the manual control at every
unit.
Advertisement
Table of Contents
