• Wire controller with week timer function,No.1-No17 is the same as front
• instructions of No18,No.19:
Timer setting (Fig. 15, 16, 17)
The timer function of this display board
is invalid when connect with the timer
of the last week, the display board will
be controlled by the week timer.
No matter the unit is turned on or turned off, press
"TIMER"button enter into Timer setting,
then use the "▲"、"▼" buttons to select
the time (As shown In Fig.15),
the setting time (Fig.16) or cancel setting (Fig.17).
Then press "Timer" Button enter into
each item setting.
19
fig 15
fig 16
fig 17
SEG
SEG