Table of Contents
Advertisement
Unit Installation Instructions
(4) Avoid direct sunshine over the unit. It is better to set up a sun shield as the protection.
(5) Place of installation must be able to drain the rainwater and defrosting water.
(6) Place of installation must ensure the machine will not be buried under snow or subject to the
influence of rubbish or oil fog.
(7) The installation site must be at a place where the air exhaust outlet does not face strong wind.
Installation of Indoor Unit
1. Selection of Installation Site
(1) Ensure the top hanging piece has strong strength to withstand the weight of the unit.
(2) The drainage pipe has convenient flow of water.
(3) There is no obstacle blocking the air intake and exhaust outlet, so as to ensure sound air circulation.
(4) The installation spaces required by the drawing must be ensured, so as to provide enough space for
the service and maintenance.
(5) The installation site must be far away from heat source, leakage of inflammable gas or smoke.
(6) The indoor unit is of ceiling mount (indoor unit is hidden inside the ceiling).
(7) The indoor and outdoor units, the power cable and the connecting electrical lines must be at least 1
meter from any TV set or radio. This is to avoid image interference or noise of the TV set or radio.
(Even if the distance is 1 meter, noise can also exist if there is strong electric wave.)
2. Installation of Indoor Unit
(1) Insert a M10 expansion bolt into the hole. Drive a nail into the bolt. Refer to the profile dimensions
drawing of the indoor unit for the distance between the holes. Refer to Figure 32 for the installation
of the expansion bolt.
(2) Install the hanger onto the indoor unit as Figure 33 shows.
(3) Install the indoor unit at the ceiling as Figure 34 shows.
I
Air Intake
Fig. 32
Installation of Indoor Unit
Ceiling-mount
Screw
螺杆
Screw
挂钩
Hanger
螺母
Nut
送风
Air Supply
Fig. 34
27
Air-conditioning Unit
Hanger
Fig. 33
I放大
I Enlargement
Advertisement
Table of Contents
