Timing Setting; Energy Saving Setting - Fisher FSOI-180B Operating And Installation Instruction Manual

Timer Setting
Ｒ
Ｒ
When the unit is shut off, timing start can be set; After the unit is
started up, timing shutoff can be set. After the "TIMER"key is pressed,
the unit enters the timing set status and the word "TIMER" flashes on
the display. Now user can press ( ) or ( ) key to increase or decrease
the set time. Press the "TIMER" key again and then the timing shall
go into effect. Now the unit starts to count the time passed. When the
unit is under timing status, you can cannel timing set by pressing the
"TIMER" key.The range of set time is between 0.5 to 24 hours.
７
20 seconds af
left.