Sta Miscellaneous Port Configuration Screen Element Descriptions - Enterasys Matrix E1 1H582-51 Software Manual

STA Miscellaneous Port Configuration Screen
Screen Element Descriptions
Refer to Table 3-12
Table 3-12 STA Miscellaneous Port Configuration Screen Element Descriptions
Use this field...
Port
Port Admin (STA
State)
Admin Edge
Admin Point
Hello time (1-10)
3-24 WebView Local Management Tasks
for a functional description of each screen element.
To...
See the port number associated with the displayed Spanning Tree port
parameters.
Select to Enable or Disable the Spanning Tree algorithm (STA) on a
port.
Set the AdminEdge to True or False. Authorized inter-switch links
should be set to false. Spanguard (if enabled) only functions on ports
with AdminEdge set to True, typically set on user ports.
Set the point-to-point status of the LAN attached to this specified port.
Options are:
True - forces the port to be considered point-to-point.
False - forces the port to be considered non point-to-point.
Auto - (default setting) allows the firmware to determining the
port's point-to-point status.
Set the time interval (in seconds) the Port will transmit BPDUs
indicating the device is active. This is only used when the Bridge Hello
Mode is set to Disable, otherwise the Bridge Hello Time is used.