Address Table Configuration Screen Element Descriptions - Enterasys Matrix E1 1H582-51 Software Manual

Table 3-8 Address Table Configuration Screen Element Descriptions
Use this field or button...
Address Table
MAC Address
VLAN (1-4094)
Port
Status
Aging Time (10-630):
Dynamic Address
Counts:
Static Address Counts:
To...
See the device's current address table entries.
Enter a MAC address for a new static address table entry.
Enter a number (1 to 4094) identifying the VLAN to which the
MAC address belongs.
Select a port number associated with the MAC Address and
VLAN.
Select a status for new static address entries. Valid options are:
Permanent - Leaves all addresses in the address table, even if
the device is reset.
Delete on Reset - Deletes all new static addresses when the
device is reset.
Delete on Timeout - Deletes all new static addresses when the
device times out.
Add the new static address entry to the address table.
Remove a selected entry from the address table. To select an
entry, click on it in the Address Table field.
Clear all entries in the device's address table.
Enter a timeout period (from 10 to 630 seconds) for aging out all
dynamically learned MAC addresses and forwarding
information.
See the number of dynamic addresses in the device's address
table.
See the number of static addresses in the device's address table.
Static addresses are those created by the user using the CLI or the
fields in this screen.
Address Table Configuration Screen
WebView Local Management Tasks 3-13