Table of Contents
Advertisement
STA spanguard Configuration Screen
Screen Element Descriptions
Refer to
Table 3-14
Table 3-14 STA Spanguard Configuration Screen Element Descriptions
Use this field...
Spanguard
Spanguard Traps
Spanguard Timeout
Port
Spanguard Lock
Status
Clear Lock
3-28
WebView Local Management Tasks
for a functional description of each screen element.
To...
SpanGuard Settings:
Enable or Disable the Spanguard feature on the device.
Enable or Disable SpanGuard Traps. If enabled the switch will send a
trap to the Network Management Station when the STP protocol is
seen on a Port that has adminEdge set to True.
Reception of a BPDU (except loopback) by a port with adminEdge set
to True will cause the port to be locked and its state set to "blocking".
Spanguard Timeout is how long (in seconds) that the port will remain
locked. The values are (0-65535) where 0 is forever.
The port number associated with the displayed Spanguard port
parameters.
See the port's current Spanguard Lock Status (either Locked or
Unlocked).
When Spanguard has locked a port, it may be manually unlocked here
by checking the "Clear Lock" box and then clicking "Apply" in the left
window pane.
Port:
Hide quick links:
Advertisement
Table of Contents
