JVC UX-QX3WA Service Manual page 9

3.1.3 Removing the top cover
(See Fig. 5 to 8)
(1) Remove the one screw D attaching the tuner bracket. (See
Fig. 5)
(2) Disconnect the card wire from tuner pack connected the
connector CN709 of the micon board. (See Fig. 6)
(3) Disconnect the card wire from touch illumination board
connected the connector
Fig. 6)
(4) Remove the two screws E attaching the top cover. (See
Fig.6, 7)
(5) Disengage the hook a and b form front panel assembly.
(See Fig. 6, 7)
(6) Lift up the top panel and then, disconnect the connector
wire from fan connected to the connector
power amplifier board. (See Fig. 8)
Top cover
Micon board
CN711 of the micon board, (See
CN108
D
Fig.5
E
hook
CN711
d
CN709
hook
Fig.6
E
of the
e
hook
a
b
hook
Fig.7
CN108
Power amplifier board
Fig.8
(No.MB574)1-9