Specifying The Track (Direct Track Selection); Repeat Playback; Program Playback - JVC UX-QX3WA Service Manual

Listening to Discs
Specifying the Track (Direct
Track Selection)
Press the number buttons to select
the track you want to listen to.
• Refer to "Using the number buttons" (
8).

Repeat Playback

This function allows you to listen repeatedly to the
same track (or group: only for MP3 disc).
Press repeatedly to select the
repeat mode.
• Each time you press
follows:
: For repeating all tracks on a
disc.
: For repeating the current (or
specified) group (only for MP3
disc).
: For repeating the current (or
specified) track.
: For canceling repeat playback.
Example: When "REPEAT ALL" is selected
NOTE
• Ejecting the disc or turning off the System also
cancels repeat playback.
16
page
, the display changes as
Repeat indicator

Program Playback

This function allows you to program up to 99
tracks.
While playback is stopped...
1
Press repeatedly to select
"PROGRAM."
Source display
2
Press the number buttons to
select the track numbers.
• Refer to "Using the number buttons" (
page 8).
For audio CD
Track number Program number
Total time for program playback
For MP3 disc
Track number
3
Press to start playback.
NOTE
• When you try to program a 100th track, "MEMORY
FULL" appears on the display window.
• When total time for program playback reaches 1
hour and 40 minutes, "--:--" appears on the
display window.
PROGRAM indicator
Program number