JVC UX-QX3WA Service Manual page 11

3.1.6 Removing the power amplifier board assembly
(See Fig. 11, 12)
(1) Remove the two screws G attaching the power amplifier
board assembly. (See Fig. 11)
(2) Disconnect the board to board connectors
ed to secondary board assembly,
nected to micon board assembly. (See Fig. 11)
(3) Disconnect the connector wire from head phone board as-
sembly connected to connector
board assembly and disconnect the card wire from CD
board connected to connector
er board. (See Fig. 12)
CN101 connect-
CN102 and CN103 con-
CN109 of the amplifier
CN106 of the power amplifi-
CN103 CN102
G
Fig.11
CN109 Power amplifier board
Fig.12
CN101
Power amplifier board
CN106
(No.MB574)1-11