3.1.4 Removing the front panel assembly
(See Fig. 9, 3, 6, 7)
(1) Disconnect the card wires from front panel assembly con-
nected to the connector
board. (See Fig. 9)
(2) Disengage the hook c, d and e from the bottom chassis.
(See Fig. 3, 6 and 7)
3.1.5 Removing the heat sink
(See Fig. 10)
(1) Remove the two screws F attaching the heat sink.
1-10 (No.MB574)
CN702
and
CN710
of the micon
CN710
Fig.9
F
Fig.10
CN702