Table of Contents
Advertisement
EB262
Air Filter
Level 1.
Parts Required:
1.
Close choke (COLD START
[
] position). This prevents
dirt from entering the carburetor
throat when the air filter is
removed. Brush accumulated
dirt from air cleaner area.
2.
Remove air filter cover. Brush
dirt from inside cover.
3.
Remove air filter and lightly brush debris from filter. Replace filter if it is
damaged, fuel soaked, very dirty, or the rubber sealing edges are
deformed. Clean the filter with a neutral detergent. Do not use solvents
for cleaning.
4.
If filter can be reused, be certain:
• The entire frame of the filter is securely seated in the housing.
• It is installed with the original side out.
5.
Install air filter cover.
Fuel Filter
Level 1.
Parts Required:
Fuel is VERY flammable. Use extreme care when mixing, storing
or handling, or serious personal injury may result.
1.
Use a clean rag to remove
loose dirt from around fuel cap
and empty fuel tank.
2.
Pull the fuel filter from the tank.
3.
Do not remove the wire coil
clamp to remove the fuel filter.
Pinch the fuel filter with the
fingers on one hand and the
fuel line with the other hand.
Pull and twist slightly to
separate.
X7501190802
© 09/19 ECHO Incorporated
Tune-Up Kit
Tune-Up Kit
MAINTENANCE
29
Advertisement
Table of Contents
