Starting Cold Engine - Shindaiwa EB262 Operator's Manual

OPERATION

Starting Cold Engine

1. Stop Switch
Move stop switch (A) away from
the STOP position.
2. Throttle Position Lever
Move throttle position lever (B)
midway between idle and full
throttle positions.
3. Choke
Move choke (C) to COLD START
( ) (closed) position.
4. Purge Bulb
Pump purge bulb (D) until fuel is
visible and flows freely in the
clear fuel tank return line.
Recoil starter: Use short pulls - only 1/2 to 2/3 of rope for starting. Do
not allow the rope to snap back in. Always hold the unit firmly.
22
A
C
D
© 09/19 ECHO Incorporated
EB262
B
X7501190802