Starting Cold Engine - Shindaiwa EB790/RT Operator's Manual

Hide thumbs Also See for EB790/RT:
Table of Contents

Advertisement

OPERATION
Stored 2-stroke fuel may separate. ALWAYS shake fuel container
thoroughly before each use.
Used oil and gasoline, and soiled towels are hazardous waste
materials. Disposal laws vary by locality.

Starting Cold Engine

EB790 only:
• Rotate spring loaded throttle arm downward to a comfortable operating
position.
EB790/RT
• Recoil starter: Use short pulls - only 1/2- 2/3 of rope length for starting. Do
not allow the rope to snap back in. Always hold the unit firmly.
1.
Throttle Lever
Move throttle lever (A) to IDLE
position.
2.
Choke
Rotate choke (B) to COLD
START position.
3.
Purge Bulb
Pump purge bulb (C) until fuel is
visible. Pump bulb an additional
4 or 5 times.
28
A
EB790
A
EB790RT
© 10/23 ECHO Incorporated
EB790/RT
X7501201900

Advertisement

Table of Contents
loading

Table of Contents