Starting Cold Engine - Shindaiwa EB810/RT Operator's Manual

EB810 / RT

Starting Cold Engine

EB810 only:
• Rotate spring loaded throttle arm downward to a comfortable operating
position.
EB810 / RT:
• Recoil starter: Use short pulls - only 1/2- 2/3 of rope length for starting.
Do not allow the rope to snap back in. Always hold the unit firmly.
1. Throttle Lever
Move throttle lever (A) to IDLE
position.
2. Choke
Rotate choke (B) to COLD
START position.
3. Purge Bulb
Pump purge bulb (C) until fuel is
visible. Pump bulb an additional
4 or 5 times.
X7501200600
© 08/19 ECHO Incorporated
A
EB810
A
EB810RT
OPERATION
27