Table of Contents
Advertisement
Pellet Reservoir / Hopper
To access the pellet reservoir, open the lid on
the top of the unit by pushing down and sliding
the clip top the left.
Fig. 52
The reservoir will hold approx 17.5 kg, to fill
the hopper carefully cut the corner of the bag
so the pellets can be poured into the hopper
without spilling outside of the rubber seal. Do
not pour dust into the hopper as it can impair
the feed screw mechanism.
Maintenance
Fig. 53
Prior to cleaning, the stove must be turned off
and allowed to cool to prevent injury.
Glass Cleaning
The glass can only be cleaned when it is com-
pletely cold. It must be cleaned with a suitable
product in accordance with the instructions for
use and care must be taken to prevent the
product from reaching the sealing cord and
painted metal parts - so as not to cause unde-
sired effects. The rope seal is fixed with adhe-
sive so any contact with water or any other liq-
uids must be avoided. If using a glass cleaning
spray, apply the product to a cloth first as
opposed to applying it directly to the glass.
Fig. 54
Fig. 14– Incorrect cleaning of the glass
Fig. 55
Fig. 56
Fig.65 & 66 – Correct cleaning of the glass.
Cleaning the glass:
a) moisten a soft cloth with liquid;
b) clean the glass using the cloth
20
Advertisement
Table of Contents
