Table of Contents
Advertisement
Contents
The package of this unit contains:
Free Standing Pellet Stove K500
Instruction manual
Power cable;
Infrared remote control;
Cleaning bar handle;
Unpacking the Unit
To unpack the equipment, you must first
remove the retractable bag that surrounds the
cardboard box. Then remove the box, lifting it
up, and remove the bag that surrounds the
stove and the packaging. To complete the pro-
cedure, unscrew the four brackets that secure
the unit to the wood pallet (Figure 1).
Installing your Pellet Stove
Remove the instruction manual from the
package, it must be passed to the home-
owner following installation.
Before installing the unit, please follow
these steps:
Check immediately after receipt if the deliv-
ered product is complete and in good state.
Any defects should be noted before
installing the appliance.
The unit is equipped with four feet at the
base, adjustable in height, allowing for the
easy regulation when installing the unit on a
non-levelled surface.
Fig. 2
Installation Requirements
1
2
3
4
5
Location
The floor should be capable of supporting the
Fig. 1
weight of the product and hearth.
A solid non combustible hearth of minimum
thickness 12 mm, The hearth should extend
150 to the side and 225mm to the front
The appliance should be installed centrally in
the area to be heated.
7
Location, Suitable area to be heated.
Floor support / Hearth.
Flue connection capable of producing
12pa flue draught.
Electrical requirements
Clearances
a) To combustibles
b) For servicing/ maintenance
Adequate air supply for combustion/
ventilation
Fig. 3
Advertisement
Table of Contents
