Security - Lincoln Electric Ranger 260MPX Operator's Manual

RANGER 260MPX & 330MPX
®

Security

The Ranger has two levels of security – Operator and Supervisor.
OPERATOR SECURITY – When the Operator PIN (personal identi-
cation number) is enabled, the engine will not start until the
proper PIN has been entered.
SUPERVISOR SECURITY – When the Supervisor PIN is enabled,
the Set-up menu and Engine menu are restricted and cannot be
access until the Supervisor PIN is entered.
A time delay may be enabled for the operator PIN. This may be
useful if the machine has been equipped with an after-market
remote start. The operator PIN is entered at the beginning of the
day, and then is not required for the selected time period.
Once in the set-up menu, select the PIN.
Rotate the knob to choose either Operator PIN
or Supervisor PIN and then press the button
to select.
Operator
PIN
Supervisor
PIN
Press knob to select
The Operator PIN has the option of setting
a time delay. Using a time delay may be
useful when one person starts the Ranger
at the beginning of the day, and other
people weld with the machine throughout
the day. The time delay allows the
machine to be turned off and restarted
during the speci ed period without
requiring a PIN entry.
Enter the current PIN. Rotate the knob to
adjust the values and press the knob to
select and advance to the next number.
Press the back button to go to a previous
number.
?
DO NOT FORGET THE PIN! The PIN may only be reset by a
Lincoln Authorized Service Shop.
Enter current PIN
8 1 2 3
Done
Press knob to select
?
Operator PIN
3 hour
delay
Press knob to select
?
B-17
Enter the new PIN.
Operator PIN
8 1 2 3
Done
Enter 0000 to clear the PIN
Press knob to select
Press and hold the knob for 5 seconds to
con rm entry of the PIN.
Important!
Number (PIN) is lost or forgotten, it
can only be reset by a Lincoln Electric
Authorized Service Shop after proof of
ownership has been established.
Press knob to select
?
OPERATION
?