RANGER
260MPX & 330MPX
®
CROSSLINC
CrossLinc provides the bene ts of remote control without a cable.
The accessory or wire feeder talks to the power source by sending
signal through the electrode cable.
To start CrossLinc, simply connect the weld cables and sense lead
per the CrossLinc device's instructions. Select the desired weld
mode with the Ranger. When weld output is ON, the CrossLinc
device will automatically link to the Ranger. The CrossLinc icon
will appear on the screen to show active communication.
When CrossLinc is active, the remote control is disabled.
124
F
½
E
Remote is
disabled
Press knob for options
CrossLinc
Output
ON
A
Icon
Hot Start
+7
Arc Force
OFF
?
B-7
OPERATION