Analog LaunchPAD (ALP) Software Setup
1.11.8 Registers Tab - Address 0x00 Expanded
By double clicking on the Address bar
or a single click on
can be expanded.
Any RW Type register,
or putting the pointer into the individual register bit(s) box by a left mouse click to put a check mark
(indicating a "1") or unchecking to remove the check mark (indicating a "0"). Click the "Apply" button to
write to the register, and "refresh" to see the new value of the selected (highlighted) register.
The box toggles on every mouse click.
22
DS90UB954-Q1EVM User's Guide
. Address 0x00 expanded reveals contents by bits. Any register address displayed
Figure 1-14. ALP Device ID Expanded
, can be written into by writing the hex value into the "Value:" box,
Copyright © 2016, Texas Instruments Incorporated
www.ti.com
SNLU223 – December 2016
Submit Documentation Feedback