Analog LaunchPAD (ALP) Software Setup
1.11.4 Startup - Software Description
Make sure all the software has been installed and the hardware is powered on and connected to the PC.
Execute "Analog LaunchPAD" shortcut from the start menu. The default start menu location is under All
Programs > Texas Instruments > Analog LaunchPAD vx.x.x > Analog LaunchPAD to start MainGUI.exe.
The application should come up in the state shown in the figure below. If it does not, see
"Troubleshooting ALP Software".
Under the Devices tab click on "DS90UB96X" to select the device and open up the device profile and its
associated tabs.
18
DS90UB954-Q1EVM User's Guide
Figure 1-8. Launching ALP
Figure 1-9. Initial ALP Screen
Copyright © 2016, Texas Instruments Incorporated
www.ti.com
Section
1.12,
SNLU223 – December 2016
Submit Documentation Feedback