Analog Launchpad (Alp) Software Setup; System Requirements; Download Contents; Installation Of The Alp Software - Texas Instruments DS90UB954-Q1EVM User Manual

www.ti.com

1.11 Analog LaunchPAD (ALP) Software Setup

1.11.1 System Requirements

1.11.2 Download Contents

Latest TI Analog LaunchPAD can be downloaded from: http://www.ti.com/tool/alp.
Download and extract the zip file to a temporary location that can be deleted later.
The following installation instructions are for a PC running Windows 7 64-bit Operating System.

1.11.3 Installation of the ALP Software

Execute the ALP Setup Wizard program called "ALPF_setup_v_x_x_x.exe" that was extracted to a
temporary location on the local drive of your PC.
There are 7 steps to the installation once the setup wizard is started:
1. Select the "Next" button.
2. Select "I accept the agreement" and then select the "Next" button.
3. Select the location to install the ALP software and then select the "Next" button.
4. Select the location for the start menu shortcut and then select the "Next" button.
5. There will then be a screen that allows the creation of a desktop icon. After selecting the desired
choices select the "Next" button.
6. Select the "Install" button, and the software will then be installed to the selected location.
7. Uncheck "Launch Analog LaunchPAD" and select the "Finish" button. The ALP software will start if
"Launch Analog LaunchPAD" is checked, but it will not be useful until the USB driver is installed and
board is attached.
Power the DS90UB96X-Q1 EVM board with a 12 VDC power supply.
SNLU223 – December 2016
Submit Documentation Feedback
Operating System:
USB:
USB2ANY Firmware Version:
USB:
Copyright © 2016, Texas Instruments Incorporated
Analog LaunchPAD (ALP) Software Setup
Windows 7 64-bit
USB2ANY
2.5.2.0
2
Aardvark I C/SPI host adapter
p/n TP240141
DS90UB954-Q1EVM User's Guide
17