Quick Start Guide
1.3
Quick Start Guide
1.3.1 System Requirements
The major components of the DS90UB954-Q1EVM are:
•
DS90UB954-Q1
•
On-board Power-over-Coax (POC) interface
•
Two FAKRA coax connectors for digital video, power, control and diagnostics
•
Samtec QSH type connector for CSI-2 interface
2
•
On-board I
C programming interface
In order to demonstrate, the following is required (not included):
•
One DS90UB953EVM
•
One DACAR/FAKRA coax cable
•
USB to mini USB cable OR I
•
Power supply for 12V @ 1A (current limited bench supply recommended)
•
Applications Processor Card
1.3.2 Applications Diagram
1.3.3 Major Components of DS90UB954EVM
6
DS90UB954-Q1EVM User's Guide
2
C host controller that support clock stretching (such as USB2ANY)
DS90UB953
MIPI CSI-2
3.2 Gbps
Serializer
DS90UB933
RAW 10/12
Serializer
Figure 1-1. Applications Diagram
Figure 1-2. Interfacing to the EVM
Copyright © 2016, Texas Instruments Incorporated
DS90UB954-Q1
Deserializer
Host / ISP
MIPI CSI-2
1.6 Gbps/lane X 4
www.ti.com
SNLU223 – December 2016
Submit Documentation Feedback