Software For Ds90Ub954Q1-Evm Evaluation - Analog Launchpad (Alp) Software Setup - Texas Instruments DS90UB954-Q1EVM User Manual

Software for DS90UB954Q1-EVM Evaluation - Analog LaunchPAD (ALP) Software Setup

10 Software for DS90UB954Q1-EVM Evaluation - Analog LaunchPAD (ALP) Software Setup
10.1 System Requirements
10.2 Download Contents
Latest TI Analog LaunchPAD can be downloaded from: http://www.ti.com/tool/alp.
Download and extract the zip file to a temporary location that can be deleted later.
The following installation instructions are for a PC running Windows 7 64-bit Operating System.
10.3 Installation of the ALP Software
Execute the ALP Setup Wizard program called "ALPF_setup_v_x_x_x.exe" that was extracted to a
temporary location on the local drive of your PC.
There are 7 steps to the installation once the setup wizard is started:
1. Select the "Next" button.
2. Select "I accept the agreement" and then select the "Next" button.
3. Select the location to install the ALP software and then select the "Next" button.
4. Select the location for the start menu shortcut and then select the "Next" button.
5. There will then be a screen that allows the creation of a desktop icon. After selecting the desired
choices select the "Next" button.
6. Select the "Install" button, and the software will then be installed to the selected location.
7. Uncheck "Launch Analog LaunchPAD" and select the "Finish" button. The ALP software will start if
"Launch Analog LaunchPAD" is checked, but it will not be useful until the USB driver is installed and
board is attached.
Power the DS90UB954-Q1 EVM board with a 12 VDC power supply.
14
DS90UB954-Q1EVM Quick Start
Operating System:
USB:
USB2ANY Firmware Version:
USB:
Copyright © 2017, Texas Instruments Incorporated
Windows 7 64-bit
USB2ANY (on-board, accessible
via mini USB connector)
2.5.2.0
2
Aardvark I C/SPI host adapter
p/n TP240141
www.ti.com
SNLU223 – August 2017
Submit Documentation Feedback