Pfaff select line 610A Owner's Manual page 14

C
Winding the bobbin from the
second spool pin
Push the second spool pin (8) into its hole.
Slide on a spool cap and place the thread
spool on the spool pin.
Threading
B
Place the thread into guide A and pull
it through opening B to the right under
hook C. Wind the thread clockw ise a few
A
times around the bobbin.
Winding
Sw itch on the main sw itch (1). H old the
end of thread rmly and press the the
foot control. The w inding action w ill stop
automatically as soon as the bobbin is full.
Cut the thread, push the bobbin to the left
and remove it.
Don't forget:
Turn the handw heel release disk (3)
back again. Then turn the handw heel (4)
tow ards you until it snaps into place.
TIP: If the machine is already threaded, you
can easily wind thread from the second spool
pin without having to unthread the machine.
14