Table of Contents
Advertisement
Stitch
4.0
G
0
2.5
3.0
G
0
2.5
2.0
G
0
2.5
Stitch
4.0
G
2-
1-2
3.0
G
2-
1-2
2.0
G
2-
1-2
Straight stitch
Stitch G is the basic straight stitch. The
stitch length can be increased up to 6 mm.
It is easier to do some sew ing jobs by
changing the needle position, e.g. top-
stitching a collar or sew ing in a zipper.
You can select up to 15 different needle
positions.
Please ensure that the needle is at its
highest position w hen adjusting the
needle position.
3-5
0/ 1
3-5
0/ 1
–
3-5
0/ 1
Zigzag stitch
In addition to overlock stitching, zigzag
stitch G, stitch w idth 5 , is also suitable
for overcasting various materials. In
this case, the material should only be
positioned halfw ay under the sew ing foot.
When overcasting the edge, make sure the
needle goes into the material and over the
edge alternately.
The w idth for overcasting can be reduced
up to 2 mm.
For overcasting dif cult materials, blind
stitch foot N o. 3 is very useful. When
3-5
0/ 1
sew ing, the thread lies over pin C, thus
3-5
0/ 1
preventing curling of the fabric edge. In
–
3-5
0/ 1
this w ay you can sew beautiful smooth
seams.
The raw edge must be guided along edge
guide B. You can adjust this edge guide
w ith adjusting screw A .
C
I mportant! When the blindhem stitch foot
is used for overcasting w ith the zigzag
A
stitch, select the right needle position.
Choose a stitch w idth in the range of 3-5
B
mm (do not use any other needle position).
29
Hide quick links:
Advertisement
Table of Contents
