Free Motion Sewing - Pfaff fashion Owner's Manual

Sewing
E
D
F
1 0 - - 2-3
6

Free Motion Sewing

G
Insert the darning foot:
C
Loosen screw D. Set the needle at its highest point and push the
pin of the darning foot fully into the hole C of the sewing foot
holder. When doing this, the guide fork G should position itself
around the presser bar. The lever E must be behind the xing
screw F. Now tighten screw D.
Free Motion Position:
Lower the presser foot lifter (A) while pushing it lightly to the
rear. This snaps the presser foot lifter into a notch (B) on the
back side of the sewing machine. In this position the thread
tension is engaged for Free Motion Sewing.
• Drop the feed dog.
• Select a straight stitch or a zigzag stitch.
• Keep an even speed, manually move your fabric.
A
Tip: For even stitches, move your fabric at a smooth even ow. Move
the fabric so the stitching does not cross.
B
3:10