Alcatel-Lucent Enterprise ALE-30h User Manual page 48

User Manual
2.59.5 Reconnect your desk phone in your business place
Your phone is already configured for remote working.
If you connect your desk phone to the digital network:
If you desk phone is already declared on digital network, you just have to connact and start it (you
desk phone is declared twice: on IP network for remote and digital network).
If you connect your phone to the IP network:
•
Connect your desk phone to the network (and plug in the power jack if you are using an external
power adapter).
•
If the option to enter PIN code when you boot your desk phone is enabled in the VPN
configuration (Request Pincode on
o The PIN code is requested.
Select this icon to go back.
o
o The phone restarts in normal mode. The VPN is temporary disabled until the next reboot.
•
If the option is not enabled:
o When the desk phone displays the 'Step 2' during the boot, repeatedly press the '*' and '#'
keys in succession until a menu is displayed.
VPN VPN Config
o
o Enter your PIN code.
Validate.
o
Enable VPN: disable the remote worker.
o
Select this icon to save parameters.
o
o The VPN configuration is saved and the main menu is displayed.
Select this icon to exit the configuration menu.
o
o The phone restarts in normal mode.
2.59.6 Reconnect your desk phone in remote place
Your phone is already configured for remote working but it was connected in your place of business.
You need to reconnect it in a remote place.
•
Connect your desk phone to the network (and plug in the power jack if you are using an external
power adapter).
•
If the option to enter PIN code when you boot your desk phone is enabled in the VPN
configuration (Request Pincode on
o The PIN code is requested.
o Enter PIN code.
Validate.
o
o The phone starts as teleworker.
•
If the option is not enabled
o When the desk phone displays the 'Step 2' during the boot, repeatedly press the '*' and '#'
keys in succession until a menu is displayed.
o VPN VPN Config
Enter your PIN code.
o
Validate.
o
Enable VPN: enable the teleworker.
o
Select this icon to save parameters.
o
o The VPN configuration is saved and the main menu is displayed.
Select this icon to exit the configuration menu.
o
o The phone starts as teleworker.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator.
8AL91432ENAAed01
Boot):
Boot):
(Request Pincode on Boot).
48 /73