Alcatel-Lucent Enterprise ALE-30h User Manual page 53

User Manual
3.10 Programming direct call keys (Perso page/F1 and F2 keys/Add-on
module)
: If your set is not equipped with a magnetic keyboard, use the alphanumeric keyboard to enter
letters. Use the alphanumeric keyboard key to switch between the numeric and alphabetic keyboard.
When in alphabetic mode, the LED corresponding to the key remains lit up.
Depending on your desk phone, you can program:
•
Softkeys of the Perso page.
•
Keys/softkeys of the add-on module.
•
F1 and F2 keys.
•
Abc' key in case a magnetic keyboard is connected (ALE-30h).
In case these keys are used for hold and transfer features, F1 and F2 are not programmable
(configuration for United States for example).
If the key is not programmed yet:
•
Select the key to program.
•
Name: enter the name of the key.
•
•
Number: enter the number to associate with the key.
•
•
Go back to the Homepage.
If the key is already programmed:
•
Reach the 'Menu' page.
•
Settings Keys
•
Select the key to program.
•
Name: enter the name of the key.
•
•
Number: enter the number to associate with the key.
•
•
Go back to the Homepage.
•
You can customize the name color and style of the key by entering a prefix. See chapter below.
8AL91432ENAAed01 53 /73