Alcatel-Lucent Enterprise ALE-30h User Manual page 46

User Manual
2.59.1 First connection as remote working
When you connect your desk phone for the first time remotely, you are prompted to set a PIN code.
The PIN code is requested when you enter in the VPN configuration (submenus) or when you boot your
desk phone (depending on the VPN configuration).
The PIN code is retained during the session so that you can access the VPN configuration without having
to re-enter your PIN code until you exit the VPN configuration.
Before configuring your phone for remote working, check if you have all the information from your
administrator.
If your set is not equipped with a magnetic keyboard, use the alphanumeric keyboard to enter
letters. Use the alphanumeric keyboard key to switch between the numeric and alphabetic keyboard.
When in alphabetic mode, the LED corresponding to the key remains lit up.
To configure your desk phone:
•
Use one of the following:
o Open the user local menu: reach the 'Menu' page
MMI
o Connect your desk phone to the network (and plug in the power jack if you are using an
external power adapter). When the desk phone displays the 'Step 2' during the boot,
repeatedly press the '*' and '#' keys in succession until a menu is displayed.
•
VPN (scroll down the menu).
VPN Config
o
▪ Enter the new PIN Code.
▪
▪ Enable
working.
VPN
▪
VPN
▪
server. The PSK can be unique for all remote workers on a same installation or can
be specific to each remote worker. In the first case, the VPN authentication has to
be enabled.
▪ IKE version:
Other advanced settings if requested:
force encapsulation,
VPN Tftp Use TFTP servers, tftp1,
o
this option and enter the addresses and port of the TFTP servers.
VPN Authent Use
o
VPN server (username and password) is required. The VPN authentication can be disabled
in case a specific PSK is used for each remote worker.
VPN Pincod Request Pincode on
o
when you boot your desk phone. We recommend you activate this option.
Select this icon to return to the main menu.
o
Select this icon to save parameters.
o
•
The VPN configuration is saved and the main menu is displayed.
•
Select this icon to exit the configuration menu. The desk phone restarts.
•
Enter the PIN code if you have selected the option
•
Validate.
•
Your desk phone is ready for remote working.
8AL91432ENAAed01
Validate.
VPN: you have to activate this option to use your desk phone for remote
Server: enter the address of the VPN server.
PSK: enter the pre-shared key to establish a secure connection with the VPN
Enter the IKV version (IKEv1/IKEv2).
Static Virtual IP (VIP
Authentification, User, Password: activate this option if a logon to the
Boot: if this option is activated, the PIN code is required
Settings Phone Local Menu Config.
IKEv1 aggressive mode
Addr).
tftp2,port: if the TFTP servers are required, activate
(Request Pincode on
(when IKEv1 enabled),
Boot).
46 /73
IKE