Contec IPC Series User Manual page 11

CAUTION
- Do not use or store this product in a location exposed to high or low temperature that exceeds range of
specification or susceptible to rapid temperature changes.
Example:
- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this product
with its interior penetrated by water or any other fluid or conductive dust. If this product must be used in such
an environment, install it on a dust-proof control panel, for example.
- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of
specification.
- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such products
will cause this product to malfunction.
- Do not use or store this product in the presence of chemicals.
- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.
Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or discoloration of
the paint.
This product's case may become hot. To avoid being burned, do not touch that section while this product is
-
in operation or immediately after turning off the power. Avoid installation in a location where people may
come into contact with that section.
- CONTEC does not provide any guarantee for the integrity of data on SSD.
- Always remove the power cable from the power outlet before mounting or removing an expansion board and
before connecting or disconnecting a connector.
- Always remove the power cable from the power outlet before connecting or disconnecting a connector.
- To prevent corruption of files, always shutdown the OS before turning off this product.
- CONTEC reserves the right to refuse to service a product modified by the user.
- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power cord
immediately and contact your retailer.
- To connect with peripherals, use a grounded, shielded cable.
- Component:
(1) Battery---The internal calendar clock and CMOS RAM are backed by a Lithium primary battery.
* Replacement of expendables is handled as a repair (there will be a charge).
* The service life for consumable parts are reference values and are not guaranteed values.
PT-S2000HX/HXC/LX/LXC Series User's Manual
- Exposure to direct sun
- In the vicinity of a heat source
11