Calling Up Information; Solar Energy - Viessmann Vitotronic 200 Operating Instructions Manual

Calling up information

You can call up current temperatures, set values, time
programs and operating states.
In the extended menu, information is split into groups:
■ "System"
■ "Heating circuit 1"
■ "Heating circuit 2"
■ "Heating circuit 3"
"Cooling circuit SKK"
■
"DHW"
■
■ "Ventilation"
■ "Solar"
■ "Heat pump"
"Energy statement": see page 51.
■
"Daily log": see page 52.
■
Detailed call-up options for the individual groups can
be found in chapter "Overview of extended menu" on
page 77.
Checking the solar energy yield
You see an overview showing how much heat your
solar thermal system has fed into your heating system
in the last 7 days.
1. Extended menu:

2. "Solar energy"

3. To show the heat amount for a certain day, select
the day using / (shown in kWh).
Energy statement
Your contractor can enable the display of energy state-
ments if required. The display is not possible with all
heat pumps.
Every energy statement shows a bar chart depicting
the energy amounts for the last 52 weeks.
1. Extended menu:
2. "Information"
3. "Energy statement"
4. Select the required energy statement, e.g. "PV
energy statemt"
Note
If names have been given to the heating/cooling cir-
cuits, these are shown: see chapter "Setting names for
heating/cooling circuits".
1. Extended menu:
2. "Information"
3. Select the group.
4. Select the information you wish to call up.
Solar energy
4.0
0
We Th
kWh Th 03/05/12
Select with
Fig. 34 The flashing line on the graph indicates that
the current day is not yet over.
5. To show the energy amounts for a certain week,
select the week using / (shown in kWh).
PV energy statemt
q
Wk. 08/15 q 7.0 kWh
Select with
Fig. 35
Calling up information
Fr Sa Su Mo Tu
1.3
08
3.8 kWh
We
51