Table of Contents
Advertisement
Handset battery charging
Charge for about 7 hours.
R Confirm "Charging" is displayed ( 1 ).
R When the batteries are fully charged, "Fully
Charged" is displayed.
Handset battery level
Icon
Battery level
High
Medium
Low
Needs charging.
Panasonic Ni-MH battery performance
(supplied batteries)
Operation
In continuous use
Not in use (standby)
Note:
R Actual battery performance depends on usage
and ambient environment.
Base unit battery installation (for
power backup)
You can insert 2 AAA (R03) batteries (not
supplied) into the base unit that will power the unit
temporarily in the event of a power failure.
Important:
R The following batteries can be used with the
base unit:
– Rechargeable Ni-MH batteries
the batteries used in your handset(s))
– Standard (non-rechargeable) alkaline
*3
batteries
R Do NOT use manganese batteries.
KX-TGF310_320BX_UE_0706_ver002.pdf 9
R Confirm correct polarities (
*1 The base unit can fully charge Ni-MH batteries
*2 We recommend using Panasonic
*3 Only insert alkaline batteries once a power
1
1
2
3
4
Operating time
17 hours max.
330 hours max.
Note:
R If your phone service provider requires
Base unit battery status when a power failure
occurs
Icon
*1, *2
(including
*1 If
Getting Started
in about 15 hours.
rechargeable batteries (page 4).
failure occurs. Remove the alkaline batteries
when power is restored.
Disconnect the telephone line cord (A).
Open the battery cover (B).
Install the batteries in the battery compartment
(C).
Close the cover, then reconnect the telephone
line cord (D).
C
B
D
additional devices in order to make and receive
calls, such as a modem, you may still not be
able to make and receive calls even if the base
unit's backup power feature is functioning.
Battery status
Power backup mode is on.
Battery power is low.
begins flashing on the base unit, replace
the batteries with new ones as soon as
possible. If you replace Ni-MH batteries with
,
).
A
*1
9
7/29/2015 11:36:00 AM
Advertisement
Table of Contents
