Table of Contents
Advertisement
To establish a conference call:
M
N a MbN: "Conference" a MOKN
R To leave the conference, press M
other 2 parties can continue the
conversation.
R To put the outside call on hold: M
"Hold" a MOKN
To resume the conference: M
"Conference" a MOKN
R To cancel the conference: M
"Stop Conference" a MOKN
You can continue the conversation with the
outside caller.
Base unit
1
During an outside call, press M
When 2 or more handsets are registered:
MbN: Select the desired unit. a MOKN
R To page all handsets, press 0 or wait for a
few seconds.
2
Wait for the paged party to answer.
R If paged party does not answer, press M
to return to the outside call.
3
To complete the transfer:
Place the corded handset on the cradle.
R The outside call is being routed to the
handset.
To establish a conference call:
Press M
N.
R To leave the conference, place the corded
handset on the cradle. The other 2 parties
can continue the conversation.
R To put the outside call on hold, press M
To resume the conference, press M
Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s) beeps
for 1 minute.
R If you receive an outside call while talking on the
intercom, the interrupt tone sounds.
– Handset: To finish intercom, press M
answer the call, press M
– Base unit: To finish intercom, place the
corded handset on the cradle. If the
speakerphone is used, press M N. To answer
KX-TGF310_320BX_UE_0706_ver002.pdf 19
the call, lift the corded handset. If the
speakerphone is used, press M N.
N. The
Making an intercom call
N a MbN:
Handset
1
M
N a MbN:
When 2 or more handsets are registered:
MbN: Select the desired unit. a MOKN
N a MbN:
2
When you finish talking, press M
Base unit
1
M
When 2 or more handsets are registered:
MbN: Select the desired unit. a MOKN
N.
R To page all handsets, press 0 or wait for a
R Lift the corded handset if needed.
2
When you finish talking, press M N or place
the corded handset on the cradle.
N
Answering an intercom call
Handset
1
Press M
2
When you finish talking, press M
Base unit
1
Press M N or lift the corded handset to answer
the page.
N.
2
When you finish talking, press M N or place
N.
the corded handset on the cradle.
Turning auto intercom on/off
This feature allows the handset and base unit to
answer intercom calls automatically when it is
called. You do not need to press M
corded handset, or press M N. When this feature
is set to "On", the monitoring handset or base unit
for the baby monitor feature (page 35) will also
answer baby monitor calls automatically. The
default setting is "Off".
Handset / Base unit
N. To
1
M
N.
2
MbN: Select the desired setting. a MOKN
3
Proceed with the operation for your unit.
Handset: M
Making/Answering Calls
N
N
few seconds.
N to answer the page.
N#273
N
N.
N.
N, lift the
19
7/29/2015 11:36:00 AM
Advertisement
Table of Contents
