Table of Contents
Advertisement
R The registered unit's name/number is
displayed.
Note:
R When this feature is on, another handset or
base unit can hear the monitored handset by
making an intercom call.
To monitor from an outside line
If you enable this feature, the unit will call a
pre-programmed phone number when the handset
detects sound. After you answer the call, you can
listen in on the room where the handset is located.
n From the phonebook:
1
M
N#268
2
MbN: "On" a MOKN
3
MbN: Select "External" to monitor from an
outside line. a M
4
MbN: "Phonebook" a MOKN
5
MbN: Select the phonebook entry. a MOKN
R "Baby Monitor" will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry does
not transfer to the monitor.
n By entering phone numbers:
1
M
N#268
2
MbN: "On" a MOKN
3
MbN: Select "External" to monitor from an
outside line. a M
4
MbN: "Manual" a MOKN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN 2 times
R "Baby Monitor" will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while baby
monitor is set to "On".
Handset
1
Press M
N on the handset being monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "Off" a MOKN a M
KX-TGF310_320BX_UE_0706_ver002.pdf 35
Editing an outside monitoring number
1
2
3
4
5
6
7
Erasing an outside monitoring number
1
2
N a M
N
3
4
5
6
Baby monitor sensitivity
You can adjust the sensitivity of the baby monitor.
Increase or decrease the sensitivity to adjust the
sound level needed to trigger the baby monitor
feature.
R This feature cannot be set during a monitoring
N a M
N
1
2
3
Answering the baby monitor
n When monitoring with a unit:
N
Handset
Press M
N on the handset being monitored.
MbN: "On/Off" a MOKN
MbN: "On" a MOKN
MbN: Select the outside line. a M
M
N a MbN: "Edit" a MOKN
Edit the name if necessary. a MOKN
Edit the phone number if necessary. a MOKN
2 times
Handset
Press M
N on the handset being monitored.
MbN: "On/Off" a MOKN
MbN: "On" a MOKN
MbN: Select the outside line. a M
M
N a MbN: "Erase" a MOKN
MbN: "Yes" a MOKN a M
call.
Handset
Press M
N on the handset being monitored.
MbN: "Sensitivity Level" a MOKN
MbN: Select the desired setting. a MOKN a
M
N
Handset: Press M
N to answer a call.
Base unit: Press M N to answer a call.
If you want to respond from the monitoring unit,
press M N.
R The monitoring unit will answer calls
automatically when the auto intercom feature
is set to "On" (page 19).
Programming
N
N
N
35
7/29/2015 11:36:01 AM
Advertisement
Table of Contents
