Memory Seats - Cadillac XT4 Owner's Manual

The massage feature will turn off after
approximately 20 minutes. Press the
massage on/off control (6) to restart
the massage function.

Memory Seats

Overview
If equipped, the memory seat feature
allows drivers to save their unique
driving positions and a shared exit
position. See Saving Seating
Positions later in this section. The
saved positions can be recalled
manually by all drivers, see Manually
Recalling Seating Positions later in
this section, and drivers with RKE
transmitters 1 and 2 can also recall
them automatically. See Auto Seat
Entry Memory Recall or Auto Seat
Exit Memory Recall later in this
section. To enable automatic recalls,
turn on Seat Entry Memory and/or
Seat Exit Memory. See Enable
Automatic Recalls under Vehicle
Personalisation Settings later in this
section. The memory recalls may be
cancelled at any time during the
recall. See Cancel Memory Seating
Recalls later in this section.
Identifying Driver Number
The vehicle identifies the current
driver by their RKE transmitter
number 1 8. The current RKE
transmitter number may be identified
by Driver Information Centre (DIC)
welcome message, You are driver x
for memory recalls. This message is
displayed the first few times the
vehicle is turned on when a different
RKE transmitter is used. For Seat
Entry Memory to work properly, save
positions to the 1 or 2 memory button
matching the driver number of this
welcome message. To aid in
identifying transmitter IDs, it is
recommended to only carry one RKE
SEATS AND RESTRAINTS
transmitter when entering the vehicle.
Perform the following if the welcome
message is not displayed:
1. Move all keys and RKE transmitters
away from the vehicle.
2. Start the vehicle with another RKE
transmitter. A DIC welcome
message should display indicating
the driver number of the other RKE
transmitter. Turn the vehicle off
and remove the other key or RKE
transmitter from the vehicle.
3. Start the vehicle with the initial
key or RKE transmitter. The DIC
welcome message should display
the driver number of the initial
RKE transmitter.
Saving Seating Positions
Read these instructions completely
before saving memory positions.
To save preferred driving positions to
1 and 2:
1. Turn the vehicle on or to ACC/
ACCESSORY. A DIC welcome
message may indicate the driver
number of the current RKE
transmitter. See Identifying Driver
Number previously in this section.
43