Driver Mode Control Light; Wait-To-Start Light; Tyre Pressure Light - Cadillac XT4 Owner's Manual

112 INSTRUMENTS AND CONTROLS
The engine coolant temperature
warning light comes on when the
engine has overheated.
If this happens, pull over and turn off
the engine as soon as possible. See
Engine Overheating 0 299.

Driver Mode Control Light

This light comes on when Sport Mode
is selected.
This light comes on when Snow/Ice
Mode is selected.
This light illuminates when Off-Road
Mode is selected.
See Driver Mode Control 0 225.

Wait-to-Start Light

For diesel engines, the wait-to-start
light shows that the engine is
functioning properly and indicates
when the engine can be started.
The fast warm-up glow plug system
makes the wait-to-start light stay on
for a shorter amount of time than
most diesel engines.
For more information, see Starting the
Engine 0 206.

Tyre Pressure Light

For vehicles with the Tyre Pressure
Monitor System (TPMS), this light
comes on briefly when the vehicle is
started. It provides information about
tyre pressures and the TPMS.
When the Light Is On Steady
This indicates that one or more of the
tyres are significantly underinflated.
A Driver Information Centre (DIC) tyre
pressure message may also display.
Stop as soon as possible, and inflate
the tyres to the pressure value shown
on the Tyre and Loading Information
label. See Tyre Pressure 0 321.
When the Light Flashes First and
Then Is On Steady
If the light flashes for about a minute
and then stays on, there may be a
problem with the TPMS. If the