Cadillac XT4 Owner's Manual page 197

196 DRIVING AND OPERATING
2. Shift into P (Park) and then restart
the engine.
If driving uphill when the
vehicle stalls, shift to
R (Reverse), release the parking
brake, and reverse
straight down.
Never try to turn the vehicle
around. If the hill is steep
enough to stall the vehicle, it is
steep enough to cause it to
roll over.
If you cannot make it up the
hill, back straight down the hill.
Never reverse down a hill in
N (Neutral) using only the
brake.
The vehicle can roll backward
quickly and you could lose
control.
If driving downhill when the
vehicle stalls, shift to a lower
gear, release the parking brake,
and drive straight down the hill.
3. If the vehicle cannot be restarted
after stalling, apply the parking
brake, shift into P (Park), and turn
the vehicle off.
3.1. Leave the vehicle and
seek help.
3.2. Stay clear of the path the
vehicle would take if it rolled
downhill.
Avoid turns that take the vehicle
across the incline of the hill. A hill
that can be driven straight up or
down might be too steep to drive
across. Driving across an incline
puts more weight on the downhill
wheels which could cause a
downhill slide or a rollover.
Surface conditions can be a
problem. Loose gravel, muddy spots,
or even wet grass can cause the
tyres to slip sideways, downhill.
If the vehicle slips sideways, it can
hit something that will trip it - a
rock, a rut, etc. - and roll over.
Hidden obstacles can make the
steepness of the incline more
severe. If a rock is driven across
with the uphill wheels, or if the
downhill wheels drop into a rut or
depression, the vehicle can tilt
even more.
If an incline must be driven across,
and the vehicle starts to slide, turn
downhill. This should help
straighten out the vehicle and
prevent the side slipping.
Warning
Getting out of the vehicle on the
downhill side when stopped across
an incline is dangerous. If the
vehicle rolls over, you could be
crushed or killed. Always get out on
the uphill side of the vehicle and
stay well clear of the rollover path.
Driving in Mud, Sand, Snow,
or Ice
Use a low gear when driving in mud
the deeper the mud, the lower the
gear. Keep the vehicle moving to avoid
getting stuck.
Traction changes when driving on
sand. On loose sand, such as on
beaches or sand dunes, the tyres tend
to sink into the sand. This affects
steering, accelerating, and braking.
Drive at a reduced speed and avoid
sharp turns or abrupt manoeuvres.