Cadillac XT4 Owner's Manual page 337

336 VEHICLE CARE
9. Power Plug
10.Air Only Hose
Tyre Sealant
Read and follow the safe handling
instructions on the label adhered to
the tyre sealant canister (4).
Check the tyre sealant expiration date
on the tyre sealant canister. The tyre
sealant canister (4) should be replaced
before its expiration date.
Replacement tyre sealant canisters are
available at your local dealer.
There is only enough sealant to seal
one tyre. After usage, the tyre sealant
canister must be replaced.
Using the Tyre Sealant and
Compressor Kit to Temporarily
Seal and Inflate a
Punctured Tyre
When using the tyre sealant and
compressor kit during cold
temperatures, warm the kit in a
heated environment for five minutes.
This will help to inflate the tyre faster.
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See Hazard Lights
0 130.
See If a Tyre Goes Flat 0 333 for other
important safety warnings.
Do not remove any objects that have
penetrated the tyre.
1. Remove the tyre sealant
canister (4) and compressor from
its storage location. See Storing the
Tyre Sealant and Compressor Kit
0 341.
2. Remove the air only hose (10) and
the power plug (9) from the bottom
of the compressor.
3. Place the compressor on the
ground near the flat tyre.
4. Attach the air only hose (10) to the
sealant canister inlet valve (1) by
turning it clockwise until tight.