Cadillac XT4 Owner's Manual page 340

Hide thumbs Also See for XT4:
Table of Contents

Advertisement

If the tyre pressure has not
dropped more than 68 kPa (10 psi)
from the recommended inflation
pressure, inflate the tyre to the
recommended inflation pressure.
24. Wipe off any sealant from the
wheel, tyre, or vehicle.
25. Dispose of the used tyre sealant
canister (4) at a local dealer or in
accordance with local state codes
and practices.
26. Replace it with a new canister
available from your dealer.
27. After temporarily sealing a tyre
using the tyre sealant and
compressor kit, take the vehicle to
an authorised dealer within 161 km
(100 mi) of driving to have the tyre
repaired or replaced.
Using the Tyre Sealant and
Compressor Kit without Sealant
to Inflate a Tyre (Not Punctured)
The kit includes:
1. Sealant Canister Inlet Valve
2. Sealant/Air Hose
3. Base of Sealant Canister
4. Tyre Sealant Canister
5. On/Off Button
6. Slot on Top of Compressor
7. Pressure Deflation Button
8. Pressure Gauge
VEHICLE CARE
9. Power Plug
10.Air Only Hose
If a tyre goes flat, avoid further tyre
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See Hazard Lights
0 130.
See If a Tyre Goes Flat 0 333 for other
important safety warnings.
1. Remove the compressor from its
storage location. See Storing the
Tyre Sealant and Compressor Kit
0 341.
2. Remove the air only hose (10) and
the power plug (9) from the bottom
of the compressor.
339

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents