Lap-Shoulder Belt - Cadillac XT4 Owner's Manual

52 SEATS AND RESTRAINTS
Warning
The seat belt can be pinched if it is
routed under plastic trim on the
seat, such as trim around the rear
backrest folding handle or side
airbag. In a crash, pinched seat
belts might not provide adequate
protection. Never allow seat belts to
be routed under plastic trim pieces.

Lap-Shoulder Belt

All seating positions in the vehicle
have a lap-shoulder belt.
The following instructions explain
how to wear a lap-shoulder belt
properly.
1. Adjust the seat, if the seat is
adjustable, so you can sit up
straight. To see how, see "Seats" in
the Index.
2. Pick up the latch plate and pull the
belt across you. Do not let it get
twisted.
The lap-shoulder belt may lock if
you pull the belt across you very
quickly. If this happens, let the belt
go back slightly to unlock it. Then
pull the belt across you more
slowly.
3. Push the latch plate into the buckle
until it clicks.
Pull up on the latch plate to make
sure it is secure.
Position the release button on the
buckle so that the seat belt could
be quickly unbuckled if necessary.
4. If equipped with a shoulder belt
height adjuster, move it to the
height that is right for you. See
Shoulder Belt Height Adjuster
later in this section for instructions
on use and important safety
information.